S-G2 FUEL DISPENSER

S-G2 FUEL DISPENSER

Pump Type:Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy : ±0.2%

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition :-40~~+55degree

Control Type : Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter):Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price :0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer :1~~9,999,999

Hose :4.5m

Weight : 247kg.

Dimension(L×W×H): 1160*560*2215(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 27

spenser because of stable operation, high anti-interference, high accuracy, long service life and wide scope of temperature adaptability, etc. Although clearance exist between piston and bushing, the leakage is very less, even no leakage. If the whole hydraulic system, including measurement transducer, work stably, with small pressure fluctuation, the leakage between piston and bushing too small to calculate when light loan. At present, the accuracy and reliability of metal-piston measurement transducer made by some domestic manufacturers are able to compare with that of famous export brand. The leakage change is still little under the v fuel dispenser arious temperatures because of low expansibility of metal piston. Therefore, it is able to keep high accuracy even in wide scope of temperature change, which is outstanding merit. Structure The exploded drawing and structural chart of metal piston measurement transducer are showed in Diagram 2-16 and 2-17. It mainly consists of frame, piston, connecting rod, connecting board, nylon wheel, driving elbow, adjusting device, end cover, etc. 1-Cap nut 2-Gasket 3\3A-Adjusting bolt 4-Nut 5\6-Hexgon screw 7-Spring gasket 8-11-12- End cover 9-Cover gasket 10-Body 13-Bolt 14-Spring washer 15-Flat washer 16-Piston set 17-Spring 18-Flat washer 19-Nylon unit 20-Upper connecting rod 21-Jointing sheet 22-Lower connecting rod 23-24-Piston fuel dispenser unit 25~33-Piston adjusting unit 34-Gasket 35-Bolt 36-Screw 37-43-Pin 38-Jointer 39-Rotation output axis 40-O-ring 41-Brass bushing 42-Driving elbow 44-Seal gasket Diagram 2-16: Exploded drawing of one kind of metal piston measurement transducer Inlet is located down of frame, which is connected with the outlet of vapor separator through pipeline. The middle of frame is oblong chamber connecting to four cylinders. fuel dispenser The side of cylinder connects to nearby cylinder. The each upper part of cylinder has an elliptical hole, which is connected to the circle groove of upper frame. Four pistons are installed in cylinders, respectively. The two

6 Page 40 of 105　　 POS handles the sales receipt including the handling of sales taxes and value added tax.　　 EPS handles the card payment receipt.　　 Both applications ensure the correct processing of duplicate receipts e.g. the word DUPLICATE added to the　　 receipt etc.　　In case the loyalty application is handled by the EPS application its receipt will be issued by the EPS.　　One application is in control of the printer so the other application simply provides the text to be printed: the　　resulting receipt could be assembled in a way that it looks as if printed by a unique application. I fuel dispenser n case the printout　　is not immediate when requested through a DeviceRequest the printer unanvailable feature will be ignored; it will be　　up to the application design to implement any feature in case local requirements are mandatory on receipt printing　　(Eft fiscal etc.).　　The DeviceRequest is the tool used by one application to require the printout by the application managing the　　printer therefore the receipt content is passed from one application to the other in text printable format.　　The receipt journal can be handled by a unique application in text format or by the combination of the two　　applications. There is no necessity to provide the information to be printed in a data format instead of in a final text　　 fuel dispenser printout format.　　This method of implementation saves the decoupling of the two applications.　　4.6 Transport　　TCPIP is selected as the transport protocol because:　　 It will run on wide range of hardware including Ethernet Token Ring and X.25.　　 It will work on different computer platforms and operating systems including Macintosh Unix Microsoft　　 mainframe and PDA.　　 It is an fuel dispenser open standard that is not owned by any manufacturer　　 It has a standard method of addressing that can uniquely identify each host on a vast network such as the　　

ration between the WHO and the CDC, together with IBM, a large computer firm, and over a dozen other groups. It is intended to develop “the use of advanced analytical and computer technology as part of a global preparedness programme for responding to potential infectious disease outbreaks.� One approach IBM hopes to take is to develop software that will help predict how diseases might spread. Another new group wants to turn the entire process of identifying outbreaks on its head. Larry Brilliant, a former WHO official who helped to eradicate smallpox in India, dreams of an open-source, non- governmental, public-access network that w fuel dispenser ould help the world move quickly whenever potential pandemics start brewing. He looks for inspiration to the Global Public Health Intelligence Network (GPHIN), an obscure programme run by the Canadian government that searches public databases in seven languages looking for early signs of disease outbreak. Dr Brilliant, who is now the head of Google s philanthropy arm, made his wish known at the Technology Entertainment Design conference, an annual gathering in California of leading entrepreneurs and thinkers from the information-technology and entertainment industries. His speech so galvanised the gathered titans that he now has the backing of Sun Microsystems, Google and several big Silicon Valley venture- capital funds and i fuel dispenser nvestors. They are helping to develop a new “web crawler�that will expand GPHIN to track newspapers and internet blogs in 40 to 100 languages. A reasonable objection to such a system is that it is based on press reports, not verified scientific data. Even so, its supporters argue that it could prove valuable. Press reports have the virtue of immediacy, and its results will always be subject to verification by the WH fuel dispenser O and government authorities, of course. But its very existence might persuade them to act more promptly. After all, that is what GPHIN did a few years ago during the SARS outbreak, when it sounded the alarm and force