K-GA FUEL DISPENSER

K-GA FUEL DISPENSER

Pump Type :Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy : ±0.2%

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition :-40~~+55degree

Control Type :Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price: 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer :1~~9,999,999

Hose :4.5m

Weight :280kg

Dimension(L×W×H) : 1180*650*2020(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 29

other part of pipeline. 3.4. Important notices to maintenance Switch off the power supply to ensure safety; repairing a container to collect pipe oil. Carefully protect the joint face in case that waste goes into inner part when disconnecting and reassembly. Clean all components before reassembly. The tightness of bolt of upper cover should be even, installed catercorner. It is suggested to adapt even strength to install other bolts and nuts in case to damage the thread of frame. Article III Measurem fuel dispenser ent transducer The fuel dispenser adapts cubage flow meter composed of measurement transducer and indicator device in accordance with the stipulation of metrological regulations on fuel dispenser of P.R.C.JJG443. Measurement transducer convert the cubage signal of oil passed over into digital signal, then into pulse signal via electric sensor. Finally, transmitting pulse signal to indicator device in where the oil volume passed over measurement transducer is indicated. Flow meter generally includes two parts--- measurement and indication, but it is often regard flow meter only has measurement function before the new appraisal regulations promulgation. Obviously, the new regulation is more scientific and accurate in the definition of measurement transducer. Measurement transducer is core component of fuel dispenser. The most basic and important technical parameters are measure accuracy, environmental adaptability and reliability. Its performance depends upon structure parameter design, material choice and manufacturing quality. The correctly usage and maintenance of course are the important condition for measurement transducer operation. Domestic fuel dispenser manufacturers now adapt two kinds of measurement transducers that divided by the model of piston. The following will introduce these two kinds ---- metal-piston meas fuel dispenser urement transducer and soft-piston measurement transducer. Metal-piston measurement transducer This kind of measurement transducer is adapted by most of manufacturer of fuel di fuel dispenser

If a field declared optional is absent and has a default value declared in the Data Dicionary the field is　　 considered present with this default value.　　 o If a field declared unused is present the field is ignored without further verifications on its value.　　 o When the Schema definition of an element or an attribute does not contains neither length constraints nor　　 default value the application has to verify the length range and apply the default value described in the　　 fuel dispenser following section Message Syntax. This rule also applies to the Lite type validation (e.g. CardPAN is a　　 string in the XML format and a BCD string in the Lite format XML decoding has to verify than the　　 characters of this string are decimal digits).　　During the coding of XML messages the POS or the EPS must conform to the following rule:　　 o If a field is declared mandatory it cannot be absent of the message (at the exception of error cases e.g;　　 CardPAN cannot be present in the response if no card has been read).　　9.3 Lite Message Coding Decoding　　During the decoding of Lite messages the POS or the EPS must conform to the following rules:　　 o If a field declared mandatory is absent the message is considered invalid.　　 o If a field declared optional is absent and has a default value declared in the Data Dicionary the field is　　 considered present with this default value.　　 o If a field declared unused is present the field is ignored without further verifications on its value.　　 o If a field contains a tag not defined in this specifications the message is considered invalid.　　 o The application has to verify the length range and apply the default value described in the following section　　 Message Format.　　During the coding of Lit fuel dispenser e messages the POS or the EPS must conform to the following rule:　　 o If a field is declared mandatory it cannot be absent of the fuel dispenser

en sold to their residents under the “right to buy�scheme introduced by the last Conservative government. Flats on high-rise estates have proved less popular, and are more likely to have stayed in the hands of local authorities. The public housing that remains in London thus contrasts more sharply with its surroundings. The social geography of London may change even less in the next 108 years than it has done since 1898. There are, after all, fewer poor neighbourhoods with pretty housing, of the kind tha fuel dispenser t may be colonised by middle-class pioneers. The supply was beginning to dry up even in the mid- 1960s, when the hero of Michael Frayn s novel “Towards the End of the Morning�tries to find one. Following a frustrating search, he admitted defeat “There was no shortage of slums; but they were not Georgian or Regency slums.� *A full explanation of the method used is available here © 2006 . Tax avoidance Holes in the net May 4th 2006 From The Economist print edition Shopping for low tax rates is no crime THE difference between tax evasion and tax avoidance, Denis Healey, a former chancellor once said, is the thickness of a prison wall. Now, it seems, it is the thickness of a lawyer s brief. Two rulings this week, one European and one British, grappled with the conundrum of how authorities in one country levy tax on profits earned in another. The first makes it easier for British companies (and, by extension, other European firms) to cut their tax bills by setting up subsidiaries in low-tax jurisdictions, while the second makes it harder for British individuals to do the same. In the first case, brought by Cadbury Schweppes, which makes soft drinks and confectionery, the European Court of Justice (ECJ) looked at whether Britain could impose a top-up tax on profits th fuel dispenser at Cadbury had earned in two subsidiaries in Ireland. It was no idle question. The Irish tax rate was just 10% while Britain s was 30%; the taxmen demanded the diffe fuel dispenser