D-GC88Q FUEL DISPENSER

D-GC88Q FUEL DISPENSER

FlowMeter Type : Optional

Accuracy :±0.2%

Pressure Loss (kg/cm) :Under 0.25

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp): 1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle : Auto Shut-off Nozzle

Environmental Condition:-40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume :0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price :0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer :1~~9,999,999

Hose :4.5m

Weight : 450kg

Dimension(L×W×H) : 1615 X 620 X2420(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 26

re approval working successfully being conducted. Environmental temperature as approval should keep in the range of �0�to �0� in approval process temperature not exceed 3� relative temperature between 30�and 90� power supply within �0% to �5%; and frequency ±1Hz. The mediums used in approval should adapt real media excepting in factory approval. As different medium would be adaptable to fuel dispens fuel dispenser er, fuel dispenser every medium should be appraised. Some of them are prohibited, especially water. The highest temperature of medium in approval should not exceed 30� the lowest temperature without coagulation. The temperature difference between the one fuel dispenser at the outlet of fuel dispenser and the temperature measured in standard instrument should not exceed 4� Otherwise, the approval is invalid. Standard instrument used in approval whose measuring accuracy no lower than one fifth of the allowed tolerance of fuel dispenser, should pass over appraisal of the Measurement Department and be valid within period. There are many standard instruments being adaptable to fuel dispenser’s approval, however, the most popular one is standard metal instrument of measurement. Standard metal instrument of measurement adapted in approval should, in accordance with the requirement of fuel dispenser’s regulations and procedure, be Class II standard metal instrument of measurement with cubage no less than one minute’s discharge volume of fuel dispenser, approval period being 3 years. Standard metal instrument of measurement often is made of stainless steel or carbonized steel with protecting painting, no air vent, erosion-resistant and smooth surface. Its structure is shown in Diagram 8-1. 1: Overflow cover 2: Metering neck 3: Body 4: Bracket 5: Adjusting bolt 6: Drain valve 7: Leveling instrument 8: Scale Diagram 6-1: Sketch map of metal standard instrument of measurement Standard instrument of measurement is composed of overflow cover, body, measuring neck, scale, valve, which should meet the follo

sponse:　　 CardServiceResponse RequestType=CardFinancialAdvice ApplicationSender=POSsell001　　WorkstationID=POS01 RequestID=01255 OverallResult=Success xmlns=www.nrf-　　arts.orgIXRetailnamespace xmlns:IFSF=www.ifsf.org　　xmlns:xsi=www.w3.org2001XMLSchema-instance xsi:schemaLocation= . CardResponse.xsd　　 Terminal TerminalID=01215034001 TerminalBatch=000126 STAN=125684　　 Tender Language fuel dispenser Code fuel dispenser =fr　　 TotalAmount Currency=EUR 26.30 TotalAmount　　 Authorization AcquirerID=0001020 CardPAN=45390125478901 TimeStamp=2002-04-　　07T18:50:06-08:00 ApprovalCode=01554444 AcquirerBatch=02050123001　　 fuel dispenser Tender　　 CardServiceResponse　　Example 5 - Indoor pre-authorisation　　This example is the same of the above a part from the content of the line items that might also be non fuel.　　The outdoor position that is not applicable but the ClerckID is opportune.　　Example 6 - Loyalty Redemption　　The redemption can be very simple or more complicate due to payment combined. This example is the　　basic point redemption.　　 CardServiceRequest RequestType=LoyaltyRedemption ApplicationSender=POSsell001　　WorkstationID=POS01 RequestID=01254 xmlns=www.nrf-arts.orgIXRetailnamespace　　August 2002 IFSF STANDARD FORECOURT PROTOCOL FP319_1.00　　 EPS POS INTERFACE SPECIFICATION　　 Page 61 of 146　　xmlns:IFSF=www.ifsf.org xmlns:xsi=www.w3.org2001XMLSchema-instance　　xsi:schemaLocation= . CardRequest.xsd　　 POSdata LanguageCode=it　　 POSTimeStamp 2002-04-07T18:39:09-08:00 POSTimeStamp　　 ServiceLevel F ServiceLevel　　 ClerkID 01203001 ClerkID　　 POSdata　　 Loyalty LoyaltyFlag=true　　 SaleItem ItemID=a001　　 ProductCode 023 Pr

summer, the FAO needed $100m to undo the damage. For the UN s emergency-relief co-ordinator, Jan Egeland, a Norwegian, the tale starkly illustrates why the world body must change the way it raises cash. In an effort to get things moving, his ponderously named Office for the Co-ordination of Humanitarian Affairs (OCHA) is setting up a much expanded Central Emergency Response Fund (CERF). The UN hopes fuel dispenser that fuel dispenser this new fund will enable it to respond to emergencies that fail to grab the attention—and dollars —of donor countries. Last October, OCHA listed ten “forgotten and neglected emergencies�in Africa, from Guinea to Somalia. CERF is also fuel dispenser meant to help the UN to get aid to disaster areas before—not after—cash is raised. Delays in funding have led not just to the loss of lives and livelihoods but also to much higher costs in the end. All this makes sense. Britain s aid minister, Hilary Benn, is calling for the new fund to be used at once to head off the latest crisis in the Horn of Africa, where 20m people may soon be starving. But despite widespread agreement on the need for more predictable, less capricious financing of the UN s humanitarian operations, some experts doubt whether CERF is the answer. Its cash will go only to UN agencies which, in many cases, simply hand over part of it to non-governmental organisations. At present, NGOs implement at least half of all humanitarian responses. One of them, Save the Children, says that NGOs should be able to apply directly for cash; it fears the new fund could create an extra layer of bureaucracy, separating them from other international donors. Doubts at the UN s World Food Programme (WFP), which operates separately from the FAO (the former deals with emergencies, the latter with long-term development), are more basic officials question whether CERF can be made to work because, they say, it ignores the critical issue of political will. “There are no ‘forgotten emergencies’� says a senior WFP man, Jean-Jacques Graisse. ?