D-22Q FUEL DISPENSER

D-22Q FUEL DISPENSER

FlowMeter Type: Optional

Accuracy :±0.2%

Pressure Loss (kg/cm): Under 0.25

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle : Auto Shut-off Nozzle

Environmental Condition: -40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer :1~~9,999,999

Hose :4.5m

Weight: 230kg.

Dimension(L×W×H): 900*620*2180(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 45 20ft: 22

VP500B with power showed in Diagram 4-4. As the simplest design, it could be installed at end of reclaiming pipe, namely, near to tank and inlet. It can simultaneously reclaim 12 nozzles, applicable to fuel dispenser with suction pump or submersible pump. Center-type reclaiming vacuum pump VP500B without power sho fuel dispenser wed in Diagram 4-5. This type of pump is very applicable to city filling station, which is powered by submersible pump, mounted 8 nozzles of reclaiming. The deployment of vapor pipe and air vent of tank ensures station’s normal operation. Distributed reclaiming vacuum pump: each fuel dispenser is mounted vapor reclaiming vacuum pump. Diagram 4-6: VP vacuum pump Diagram 4-7: Separated jointer Diagram 4-8: Coaxial hose Separated jointer: its main function is used as convert jointer to separate vapor and oil. Repeated use breakaway: used for protecting fuel dispenser in case of pull down by vehicle. As exterior pull reaching 310~350lb, breakaway is automatically closed, at same time switch off pipelines of vapor and oil. Coaxial hose: a kind of hose with two layers that delivery vapor in internal and exterior oil. Nozzle: with double-layer pipes, mounted vapor valve. Fuel dispenser with vapor recovery system This kind of fuel dispenser with vapor recovery function is used for reclaiming volatile oil vapor near outlet without affecting normal refueling. There are two types widely adopting in domestic market, one is the new developed fuel dispenser that has vapor recovery function; the ot fuel dispenser her type is improved fuel dispenser based upon traditional dispenser and added vapor recovery function. Generally, these are divided into two categories: submersible type and built-in pump type. Diagram 4-9: Vapor recovery nozzle Submersible fuel dispenser with vapor recovery function If adopt vacuum-aid vapor recovery system, the matching fuel dispenser with vapor recovery function should adopt submersible fuel dispenser. Its working principle is that center vacuum pump g fuel dispenser

nozzle.　　 The PR_Id (value 1-8) specifies the product the product　　 which is stored in the Product Database PR_ID (address　　 41H-48H).　　 0 = not product assigned　　 1 = product in Product Database with address 41H　　 2 = pro fuel dispenser duct in Product Database with address 42H　　 .　　 8 = product in Product Database with address 48H　　 Please note that the PR_Id referenced here may differ　　 from the PR_Id that is linked to the respective meter in　　 the Meter database. If the logical nozzle is a blended　　 product then this PR_Id will defiantly be different.　　 Please note that dispensers that do not permit this Data_Id　　 to be changed remotely should:　　 - Reject any write attempts with a Data_ACK value of 2　　 (Read OnlyNot Writable).　　 - Must set the Data_Id to the hard coded default value.　　 When a master resetcold start occurs on the dispenser　　 device the dispenser should reset this Data_Id to its　　 default value.　　 PCD Comment:　　 As with standard IFSF dispensers the PCD may or may　　 not need product nozzle meter configuration from the　　 SCCD. However it will be beneficial if the PCD can　　 have a hardcoded value for many of these parameters.　　October fuel dispenser 2005 IFSF - STANDARD FORECOURT PROTOCOL FP31_2.22　　 DISPENSER APPLICATION　　 Page: 113　　 5 Bin8 R(1-9) O　　 Physical_Noz_Id　〠fuel dispenser

ard to attract and retain foreign investment,�he noted, “it would be unfortunate if the discussions were dominated by those who did not want to treat foreign companies fairly.� The damage done to sales through government action, however, is less important than the bad publicity. Neither company will quantify the fuel dispenser losses it has suffered. But both have mounted campaigns advertising the safety of their products. They say both that the CSE test results are wrong, and that, even if true, the levels of pesticide are negligible and of no danger at all to human health. They point out that rice, for example, is permitted to contain 34,180 times more pesticide residues than bottled water, which has, they say, similar levels to fizzy drinks. They insinuate ulterior motives behind CSE s campaign. Ms Narain argues that some residues must be tolerated in food, since farmers use pesticides to grow crops. But for soft drinks, she says, there is no excuse for the presence of pesticides, since the technology exists to clean the water quite cheaply. An earlier CSE report in 2003 that found pesticide traces in the companies products led to the establishment of a joint parliamentary committee to investigate. This found that there were indeed pesticides in the carbonated drinks, and directed the government to draw up standards. The BIS has since done that, but the standards have not been implemented. PepsiCo argues that you can reliably test for residues in the water, sugar and concentrate that go into its drinks, but not in the drinks fuel dispenser themselves. Yet, like Coca-Cola, which has produced reports from a British laboratory apparently contradicting CSE s findings, it would accept such “final-product standards�if “a robust enough process� were available. It was the BIS s failure to implement such standards—blamed by Ms Narain on the health ministry, under pressure from the cola firms—that prompted CSE to undertake its follow-up study. Passionate rigour In the 25 years since Ms Narain w fuel dispenser